Our 1302S Story…

This is the story of a UK registered, 1302s Beetle that has been in a state of restoration since 1995.

  • The Beginning
    August 1995 and the decision to buy a classic car to ‘do up’ was made. I was looking at another Ford, a Mk3 Cortina 2000E but my wife wasn’t sure, as this would be the car for her to take long to classic car shows while I had my Ford Capri 2.8i. A VW Beetle… Read more: The Beginning
  • The Resto Begins
    Back in August 1995, at our rented garage (lock up), the wife and I had stripped the car down so we could assess the way forward. It had become apparent that a few more welding jobs would be needed. By the summer of 1996 I had been preparing to work on the Beetle so had… Read more: The Resto Begins
  • Professional Help
    A year later, Autumn 1997, we had the finances to take the Beetle to seek a professional and were directed to a chap known as Mike the Welder, who was taking over a former VW specialist garage on the Wimborne Road in Bournemouth. Buoyed by his no problem approach and promising to keep his current… Read more: Professional Help
  • Summer 2000
    Nothing happened to the Beetle… Only that we had to move it from the lock up as the group of garages was to be sold and the land developed in to housing. In the summer of 1999, we had moved house to a place with scope to accommodate off road parking and extra garaging. The… Read more: Summer 2000
  • Runners and Pedals
    The financial situation had eased which helped fire up the enthusiasm with the Beetle in the spring of 2008. The covers were removed to reveal the Beetle was fairing well in the car port under a tarpaulin. At some point, Grey zinc primer had been applied to the surface rust that was appearing on the… Read more: Runners and Pedals
  • Dropping the Engine
    By May 2009 I had some spare time, money in the bank with the next idea to remove the engine to either strip down or consider a short block replacement. When we bought the car in 1995 we were told of a bottom end knock which was either crankshaft bearings or the big ends needed… Read more: Dropping the Engine
  • May 2016
    Nothing much to see here… Just look at what I had done and left that engine out on the floor like that since May 2009! It was covered up but it still had 7 years of dampness to spoil it some more. Note the rear end was resting on the gearbox mounting, on an off-cut… Read more: May 2016
  • Summer 2020
    Four years later and plans were afoot to enclose the carport, I had built 20 years earlier, with walls, double doors and lay a concrete floor. With the restrictions of a UK lockdown from COVID-19 easing by May 2020, the Beetle was relieved of its resting place on the wooden block. The tyres were pumped… Read more: Summer 2020
  • The Winter Inspection
    October 2020 – With the carport now converted in to a dry weather proof environment it was now time to take a closer look at the Beetle to assess the work required to get the body and floor sorted for once and for all. I made a couple of short partial walk around videos (below)… Read more: The Winter Inspection
  • Preparation begins
    By March 2021 I had begun to take a closer look at the areas I thought would require repairs. Armed with an angle grinder and a knotted wire brush attachment, I started in the right hand side rear wheel arch. As I ground away behind the black under seal there was a lot of filler… Read more: Preparation begins
  • Restoration – 3rd Attempt
    June 2021: It was a warm sunny Saturday when Paul from South Coast Customs & Classics arrived to transport the 1302S Beetle back to his workshop. The plan that day was to separate the body from the floor pan as well as strip down the car some more so the welding on the body and… Read more: Restoration – 3rd Attempt
  • The Floor Pan
    July 2021: A few weeks after separating the body from the floor I went over to help Paul strip the floor pan down to its bare chassis spine. To start, we had to remove the previously replaced floors by cutting as close to the main central tunnel as we could, but ensuring not to cut… Read more: The Floor Pan
  • Back from the Powder Coaters
    By the end of the month (July 2021) the floor pan and various other parts came back to Paul’s yard, from Blandford Industrial Spraying, looking fantastic in their bright white paint (RAL 9010).
  • Floor Pan Rebuild
    During August I took the opportunity to clean up the gearbox, first by soaking, scraping and scrubbing it with old petrol to loosen the dirt. It was followed by a more detailed clean using a degreaser before finally jet washing. At the end of August 2021 going in to September, I had some time off… Read more: Floor Pan Rebuild
  • Floor Pan is Home
    October 2021, and Paul delivered the the floor pan back home. Leading up to this point, I had stripped down the front struts with other steering components in readiness for sending away to be powder coated in the same bright white. I had tinkered with painting the gear lever gloss white but it wasn’t quite… Read more: Floor Pan is Home
  • The Body Shell
    November 2021: With the semi-rolling floor pan returned home, Paul had the body shell to work on. By the time I went back to his workshop to help out, a couple of weeks later, he had already replaced the rear bumper bracket mount, repair sections so as to get it up on to a rotisserie.… Read more: The Body Shell
  • … some time later
    Talk about taking my time. My main excuse for the long break was that from March to August 2022 we had goose eggs being incubated and then the single success of a hatched gosling was growing up in the workshop that housed the beetle. The gosling (Ashley) took up a fair amount of space so… Read more: … some time later
  • Fettling
    During October 2022, one of the other little jobs that had hung over me for the most part of 12 months was to finish off the brake lines for the rear. During the summer, I had found on eBay nearly new, flexible brake pipes for the front and rear and finally ordered from Amazon some… Read more: Fettling
  • Schultz Gun Painting (Cobra Bedliner)
    November 2022 and with the earlier jobs done I could take a closer look at the bodywork in some more detail. It had been on my mind for some time but I was keen to try out the Cobra Bedliner I had bought back in March 2022. It all looked simple on the video I… Read more: Schultz Gun Painting (Cobra Bedliner)
  • Minor jobs
    Dec 2022 – Jan 2023: Stripping out the dash, the wiring and finally removing a stubborn steering column were the last of the jobs to reduce the body shell down to a… shell. The wiring loom was left in place as I hadn’t found any suitable cord or cables to re-route and pull it through… Read more: Minor jobs
  • Brake Master Cylinder
    After a year of waiting, I finally got around to sending my brake master cylinder for refurbishment in January/February 2023. As the pictures show, it was in a sorry state after sitting unused for over 27 years, causing it to dry out and deteriorate. Initially, I considered buying a brand-new RHD master cylinder, but the… Read more: Brake Master Cylinder
  • Body work and prep
    March 2023 saw me make more progress on the Beetle’s body work by the way of a 3rd or 4th round of filling, sanding and cleaning up with more filler on the original 1997 repairs. I also got to flat off the spot welds around the front cowl at bonnet opening and front valance and… Read more: Body work and prep
  • 1st Coat of Primer
    Easter Sunday (April 2023) and I took the plunge for my first attempt to apply a coat of primer with the spray gun. The work space around the Beetle was tidied, cleared of obstructions and covered up and I had set up the compressor with the new air hose line for better air delivery to… Read more: 1st Coat of Primer
  • Floor Pan Bedliner Applied
    As it was a good day for weather last Sunday (7th May) I got to roll the floor pan out and, with some help, turn it on it’s side in readiness to spray on the Bedliner for Color. It was the last of the 3 bottle batch I bought last year. It was something I… Read more: Floor Pan Bedliner Applied
  • A little more primer
    By the end of May I had plopped on some more filler to smooth out a few bumps and high spots, mainly on the rear valence and engine bay aperture. I also added some filler to sort out the minor corrosion on the rain gutter on the right side (UK drivers side) above the door.… Read more: A little more primer
  • Framehead Cover Plate
    Just a short update: The frame head had a hole that would need covering. With the availability of 3D printing at my place of work I created a drawing in Adobe Illustrator and passed it to our ‘man’ who then did the necessary work to output to the 3D printer. The end result was a… Read more: Framehead Cover Plate
  • Painting 2K
    After watching a few YouTube videos, I gave spray painting a shot in the engine bay around the end of July 2023. I chose bright white (RAL 9010) and used the hardener/activator that came with the primer. I was careful not to use too much, as I thought the primer and hardener were best kept… Read more: Painting 2K
  • The Setbacks
    Since August 2023, it had been a trying time with one thing and another, with all available finances being directed to the daily driver cars. Trying to invigorate motivation over Christmas, I sought to work on cleaning the CV joints and putting on new CV boots. Dismantling the joints was reasonably simple and while messy,… Read more: The Setbacks
  • End of 2024 Update
    It’s been a while but once the daily driver cars were sorted, I could recover from the financial strain they put me under and my focus could get on with fixing the Ford Corsair. I resolved the messed up paint job in the Beetle engine bay by using bright white aerosol primer & paint, however,… Read more: End of 2024 Update
  • Gearbox goes away & front strut reassembly
    At the end of January, I took myself on a road trip to Newcastle-under-Lyme to visit John Walklett Transmissions. I could have sent the gearbox via courier, but for the cost involved, I may as well go myself—and this way, I could speak to John face-to-face. His workshop was a small unit packed to the… Read more: Gearbox goes away & front strut reassembly
  • Meanwhile…
    With the gearbox away I took the opportunity to prepare for its return. I rebuilt the driveshafts that I had ‘done’ last year. I had bought 4 new CV joints in January and fitted them, and then re-fitted them, as I had got the washers the wrong way around on the first attempt. I also… Read more: Meanwhile…
  • Front Valence & Gearbox returns
    The front valence had taken something of a beating way back in June 2021 when the body was removed from the floorpan. Now seemed the right time to try and fix it. First a hammer and dolly was used to sort out the ripples, high spots and dents. A plop of filler, sanded, some primer,… Read more: Front Valence & Gearbox returns
  • Body Work and Paint
    Painting back in May (2025) with colour was another failure.As I mentioned in my last blog, it was actually worse than my first attempt. A severely clogged spray gun, full of old paint, combined with blocked vents on the paint cup, only added to the list of faults with my cheap 1.5-nozzle gun. The replacement… Read more: Body Work and Paint
  • Painting the 4th time
    I couldn’t help but to mock up with the wings and the removable rear valance, it almost looked like it was nearly there… finished! It did confirm my thoughts that I would need better condition rear wings, but the fronts were OK. The last paint attempt wasn’t too bad – in most parts I could… Read more: Painting the 4th time
  • Painting – the fifth time
    On the Wedenesday I went to visit Paul at South Coast Customs & Classics, however, it turned out I could do him a favour. As I was driving to Charlton Marshal, just outside Blandford, I saw Paul in a bus-stop layby with a very smart blue Beetle with the engine lid open. Luckily there was… Read more: Painting – the fifth time
  • Engine Bay Paint and Rubber
    At the end of summer the weather was still warm and dry, so I took the opportunity to respray the engine bay in bright white, as before, however this time with successful results. With some fiddling I worked out how to get my spray gun to a correct working pressure and I took extra care… Read more: Engine Bay Paint and Rubber
  • Body to Floor Pan
    February 2026: The day finally arrived for the body to be put back onto the floor pan. Paul and his assistant, Ash, came over on Saturday afternoon, and I had prepped the work area as much as I could think of beforehand. Paul got straight to it, quickly cutting some notches in the rear crossmember… Read more: Body to Floor Pan
  • Front Brakes and Suspension Refit
    March 2026: With the body and floor pan finally reunited, I was keen to press on and get the brake lines finished and the front suspension components fitted. Before that though, I wanted to freshen up the front wheel arches so they matched the rears. I still had plenty of the white paint left over… Read more: Front Brakes and Suspension Refit
  • Mock Up to Motivate
    Still a long way to go but seeing the little car back together like this, shows the progress and hopefully maintain some momentum to carry on. Next step apart from partially stripping the engine down was to finish the other minor jobs.
  • Summer Jobs 2026
    I had been busy on and off with various jobs on the Beetle. The first priority was to finish plumbing in the brake system now that the body was back on. I’ll say it now: fitting the pipework from the brake fluid reservoir to the master cylinder was, so far, probably the most frustrating and… Read more: Summer Jobs 2026
  • Engine Strip Down
    August 2026: I spent part of a Saturday with Paul (South Coast Customs & Classics) stripping down the Beetle’s engine block. I had removed as much as I dared, including the carburettor, fuel intakes, engine tins, fan shroud, dynamo, heat exchangers and exhaust system. I couldn’t separate the fan assembly from the dynamo as I… Read more: Engine Strip Down