Categories
bodywork gearbox mechanics

Front Valence & Gearbox returns

The front valence had taken something of a beating way back in June 2021 when the body was removed from the floorpan. Now seemed the right time to try and fix it.

First a hammer and dolly was used to sort out the ripples, high spots and dents. A plop of filler, sanded, some primer, smoothed and then a bit more filler, sanded and re-primered. I later applied some colour, which showed up some defects in my filler application but as I will do the paint again, it will serve as a ‘guide’ coat for now.

The gearbox came back from John Walklett Transmissions at the end of May. Fitting wasn’t as straightforward as I thought it would be and aligning the rubber gearbox mounts with the gearbox cradle was a struggle but I got there in the end. All associated components were re-attached and another major step forward made.

Lets have a look how it was 4 years ago, compared to now…

And here is where I got to with the 2nd attempt at applying colour. In fact the finish was worse than my first go, but with out the paint runs and sags. It came out the spray gun as a spatter, probably due to not enough air pressure to atomise the paint more and so the finish was very ‘textured’ much like orange peel. I used rattle can aerosol for around the engine lid mountings and rear air grill under the rear window. The finish came out as a satin finish, much like the white I did inthe engine bay.

Categories
mechanics suspension

Meanwhile…

With the gearbox away I took the opportunity to prepare for its return. I rebuilt the driveshafts that I had ‘done’ last year. I had bought 4 new CV joints in January and fitted them, and then re-fitted them, as I had got the washers the wrong way around on the first attempt. I also fitted the new rear (Sachs) shocks I bought a while ago. Rather than purchase new high tensile steel bolts for the rear shock from the likes of Just Kampers/Cool Air/VW Heritage for £3+ per bolt, I could buy 4 bolts from Westfield Fasteners for less than £7. I also bought several other bolts, washers and nuts, mostly in stainless steel for re-assembly later on.

A new gear linkage coupling (CSP) polyurethane was also bought and fitted in readiness for when the gearbox cam back from John Walklett. Having spoken to John on the phone in the week, he was hoping to have the box done by the end of April – it was next on his to list but higher priority tasks had jumped the queue.

Categories
bodywork mechanics paint

The Setbacks

Since August 2023, it had been a trying time with one thing and another, with all available finances being directed to the daily driver cars. Trying to invigorate motivation over Christmas, I sought to work on cleaning the CV joints and putting on new CV boots. Dismantling the joints was reasonably simple and while messy, not too difficult to clean over a period of days. Ball bearings from one CV joint had signs of wear (a blue-ish tinge) and the other 3 seemed good. However, re-assembly of the good CV joints with their corresponding ball bearing and bearing cages proved to be quite difficult. They wouldn’t just slip back in to place without a bit of force required and then only one of the CV joints remained supple, so I think dismantling and a re-assembly will be on the cards, failing that, I buy a new set of 4 CV joints and be done with it.

Roll around to February 2024 and the mis-haps continued. The weather was nice and I felt I could take on the quick task of respraying the engine bay in bright white to fix the overspray error from last year. Through January over a few weeks I filled some minor holes and gaps in the engine bay area and prepped in readiness for painting.

Set back number 1: I damaged, beyond repair, the new spray gun bought last year by over tightening a BCP coupling.

Set back number 2: In my haste to make do with the other spray gun, I didn’t get my mixing ratios right (hindsight) by misreading the ratios on the measuring cup.

Set back number 3: Because of the messed up ratios the paint was too thin and the spray gun pattern was all over the place. Paint coverage was poor with runs and pooling of the paint, it was time to stop and clean up the mess. Subsequently, the area was later re-rubbed down in readiness for another attempt when I felt confident and ready to tackle it again.

Engine bay rubbed back down after the disastrous attempt at painting
Engine bay rubbed back down after the disastrous attempt at painting