Categories
bodywork paint painting

Painting – the fifth time

On the Wedenesday I went to visit Paul at South Coast Customs & Classics, however, it turned out I could do him a favour. As I was driving to Charlton Marshal, just outside Blandford, I saw Paul in a bus-stop layby with a very smart blue Beetle with the engine lid open. Luckily there was a bus-stop layby opposite, so I pulled over to see what was going on. The blue Beetle had an ignition failure while on the way to the MOT station and was only 100 metres short of getting there but the garage didn’t want to MOT the car if it couldn’t be driven in. As it happened, I had a tow rope in the boot of my Corsair and offered to get Paul and the Beetle back to his workshop. Once back to the workshop and the Beetle pushed in to the work bay, I got to meet Ash his new work colleague, for the past couple of years.

Categories
bodywork paint painting

Painting the 4th time

I couldn’t help but to mock up with the wings and the removable rear valance, it almost looked like it was nearly there… finished! It did confirm my thoughts that I would need better condition rear wings, but the fronts were OK.

The last paint attempt wasn’t too bad – in most parts I could live with it, but as I was preparing to do the bonnet shuts, front scuttle, front quarter panels and lower parts of the front valence I felt it worth while re-doing the dashboard again as well as digging out the rear valence to paint that too. It turned out to be decision I would regret. Again, various factors at play here from a bad spray gun set up to paint being too ‘dry’ or having too much faith in the fast hardner. Whatever, the paint came out in a spatter (again) and the finish was as expected textured, lumpy orange peel.

I must be glutton for punishment and mockery, its terrible.
This is a portion of the rear valence, takes a brave person to admit to doing this.

So it seems I have a pattern of work, paint on a Sunday, only to rub it all back on the Monday. Well, not the rear valance, thats my sample to show people how bad I am at car spray painting and also gather some advice from folk who know how to paint cars. My next step is to get some advice, salvage the existing paint or buy some fresh paint with standard hardner.

Categories
bodywork paint painting

Body Work and Paint

Painting back in May (2025) with colour was another failure.
As I mentioned in my last blog, it was actually worse than my first attempt. A severely clogged spray gun, full of old paint, combined with blocked vents on the paint cup, only added to the list of faults with my cheap 1.5-nozzle gun. The replacement 1.4 Fast Mover FMT 3006/1.4 hadn’t fared much better either, thanks to a poor clean after the earlier primer disaster.

VW 1302S Beetle body in pre-paint prep stage
VW 1302S Beetle body in pre-paint prep stage