Categories
paint painting

Floor Pan Bedliner Applied

As it was a good day for weather last Sunday (7th May) I got to roll the floor pan out and, with some help, turn it on it’s side in readiness to spray on the Bedliner for Color. It was the last of the 3 bottle batch I bought last year. It was something I had been wanting to do for a while. The main reason for the Bedliner/Shultz is that powder coating is nice but it chips easily, as I found out again when I caught the gearbox on the rear horns when I removed it to aid the turning of the floor pan on to its side. Also, if applied thickly it is supposed to help with the sound deadening, guess I’ll take those people’s word for it.

I only did the floor underside and the frame head as, in my (uneducated) opinion, they were most likely to take the brunt of the road rash, when this car finally makes on the road. Note, the wooden beam was just a precaution, the whole thing on its side was self supporting with out it. At the front, the track control arm end is through the centre hole of the wheel (wrapped in a cloth) and the anti roll bar is resting on a wooden block.

So this is what I used (above), as before on the beetle body shell inner wings, underside of the engine/gearbox cover and at the front underside. I also got to revisit missed areas of the body shell when I thought I made a good coverage of the floor pan/frame head. Hopefully that will be good enough to withstand various road conditions.

While the compressor and spray stuff was all out and the floor pan was drying I decided to re-apply more primer after the last primer session in April was rubbed down after more filler had been applied and rubbed back again. The end result is much better, it just needs a light rub back and then I will leave it for now to decide if more touch up filler is needed. There is a rust repair to do on the drip rail, just above the drivers door and most of the metal is there, so it will be a filler job.

I am very tempted to get the colour (Clementine L20D) done on the inside… However, I overspent a bit this month on spares, so it will have to wait until next month. The floor pan was dusted down, cleaned up, then covered in dust sheets and rolled back under the 1302 body shell.