Water Leak and Oil Changes

Ford Corsair layby B3081
Ford Corsair in a layby B3081 Near Win Green

The weather took a turn to being unpredictable during May but I did manage one more trip to the office and that again was a very cold morning drive, but had turned cloudy for the journey home. During a week off work doing stuff to the Beetle – see the link to that here, one evening was particulary pleasant, so I took the Corsair for a favourite drive of mine along the B3081 up Zig-Zag Hill and a return trip via Compton Abbas Airfield, Fontmell Magna and Cann on the A350. However, upon parking the car in the garage I heard an ominous noise of hissing and was rather concerned the car had over heated.

It turned out the heater hose from the water pump to the ‘heater matrix’ (which is not connected) had touched the right bank exhaust manifold and split. I was quick to grab a large drip tray to catch most of the water as it dribbled out after I put the car away for the night. A search on the internet found Classic Ford Spares and the very pipe I required. The price was a bit high, so I thought I could do a quick fix myself using a piece of copper pipe as a sleeve inside the pipe at the point of the leak. After I had made the temporary repair, prepared a fresh mix of water and anti-freeze I filled the radiator, only to be met with the sound of dripping water. My sleeved repair didn’t work as the pipe was too perished and so I had to bite bullet and buy a new pipe.

I was a bit sceptical of the website as it was one I hadn’t used before and various reviews were OK, so long as you got the name of the company correct. Anyway, within a few days of placing my order I received the pipe – a genuine re-manufactured pattern part. It looked a proper part too, more suited than the pipe I already had on the car and that evening I set about fitting it. About 3 inches was trimmed at the end that fitted to the water pump, as I assumed this part would also be suitable for the 3 litre Essex engine. Fitting some of the pipe clips required some persuation with vaseline but all was good. A fill up with water rather than using my precious anti-freeze (£34.95 for 5 litres!) revealed no leaks this time. I’ll add an Anti-freeze mix by Autumn.

Essex V4 / V6 heater hose
Essex V4 / V6 heater hose – note my sleeved failed fix.

With the water works all sorted, next was the long over due oil change. I could have gone to Burton or other online retailers, but I like to try and use my local motor factor where I can, hence the price of the anti-freeze. Obtaining an oil filter was proving tricky as the chap in the shop wanted a part number. The current oil filter was acquired from another local motor factor that had since closed and the part number on that filter wasn’t recognised by the other local motor factor. I obtained 3 part numbers from the internet and the man in the shop settled on using the old refernce to a Bosch part number. A day later I had a new Bosch filter (£7). Having opened my 5 litre bottle earlier in the year for a top-up I bought 3 more litres of oil just to be sure I had enough.

motor oil and oil filter

It turned out I had bought more oil than needed and in the picture you can see the oil filter reference – so you too can use you local motor factor. I’d done plenty of oil changes in the past and thus believing I only had about 3.5 litres in my main bottle, I poured it all in without checking the levels… and for the first time, I had over filled the engine, so had to drain off about 500ml. Next was topping up the gearbox oil and then all the jobs that I had been wanting to for some time were done.

Next task will be sorting out the gas leaks on the exhaust manifold joints on the exhaust system.

Ford Corsair layby B3081
Ford Corsair in a layby B3081 near Win Green (Clump of trees in the background to the left)

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.