Gear Lever Repair & Exhaust Reseal

a quick clean with Meguiars waterless wash spray
A quick clean with Meguiars waterless wash spray and micro fibre cloth

With the other repairs behind me all was good with the Corsair, so I decided to do something about sorting the sloppy gear lever action. It had always been loose and wobbly and I had got used to it, even when the spring cover used to pop out when I had the plastic gear lever nut and the lever would only stay in place by the rubber boot. I bought my parts through Kelvedon Lotus, mainly serving the racing community of Lotus tuned Fords and other marques. The only part I couldn’t get was the spring washer, but I bought a gear lever repair kit mainly for the nylon ball and lever bushes adding a new gear lever spring cover and a new spring.

Continue reading “Gear Lever Repair & Exhaust Reseal”

Exhausting exhausts

Way back in December 2021 I bought a couple of exhaust manifolds on eBay with the intention of fitting them over the Christmas holiday. Three months later I finally get around to finding the energy to do something about them. With the car turned around in the garage and supported on axel stands I begun to undo the exhaust clamps and manifold bolts. I knew I had a bent manifold bolt to deal with and used my Christmas money to purchase a Dremel drill. Thankfully I chose a Dremel 4000 (175W) kit to cut off the bolt that a socket or spanner could no longer get a purchase on. It was just as well I had gone for the kit with the flexi extension, as the Dremel would not have got in to the tight space under the manifold to cut the bolt head off. The job of removing the manifolds had taken about 1.5 hours as the down pipe clamps to the exhaust system were tricky to reach from under the car. As can be seen in the picture (below) they were in a poor state and the gaskets had crumbled away to nothing hence the severe blowing experienced.

Ford Corsair exhaust manifolds
Ford Corsair exhaust manifolds that were removed
Ford Corsair & exhaust manifolds
Corsair (V4) in the garage with it’s exhaust manifolds removed
Continue reading “Exhausting exhausts”