Categories
bodywork gearbox mechanics

Front Valence & Gearbox returns

The front valence had taken something of a beating way back in June 2021 when the body was removed from the floorpan. Now seemed the right time to try and fix it.

First a hammer and dolly was used to sort out the ripples, high spots and dents. A plop of filler, sanded, some primer, smoothed and then a bit more filler, sanded and re-primered. I later applied some colour, which showed up some defects in my filler application but as I will do the paint again, it will serve as a ‘guide’ coat for now.

The gearbox came back from John Walklett Transmissions at the end of May. Fitting wasn’t as straightforward as I thought it would be and aligning the rubber gearbox mounts with the gearbox cradle was a struggle but I got there in the end. All associated components were re-attached and another major step forward made.

Lets have a look how it was 4 years ago, compared to now…

And here is where I got to with the 2nd attempt at applying colour. In fact the finish was worse than my first go, but with out the paint runs and sags. It came out the spray gun as a spatter, probably due to not enough air pressure to atomise the paint more and so the finish was very ‘textured’ much like orange peel. I used rattle can aerosol for around the engine lid mountings and rear air grill under the rear window. The finish came out as a satin finish, much like the white I did inthe engine bay.