Since August 2023, it had been a trying time with one thing and another, with all available finances being directed to the daily driver cars. Trying to invigorate motivation over Christmas, I sought to work on cleaning the CV joints and putting on new CV boots. Dismantling the joints was reasonably simple and while messy, not too difficult to clean over a period of days. Ball bearings from one CV joint had signs of wear (a blue-ish tinge) and the other 3 seemed good. However, re-assembly of the good CV joints with their corresponding ball bearing and bearing cages proved to be quite difficult. They wouldn’t just slip back in to place without a bit of force required and then only one of the CV joints remained supple, so I think dismantling and a re-assembly will be on the cards, failing that, I buy a new set of 4 CV joints and be done with it.





Roll around to February 2024 and the mis-haps continued. The weather was nice and I felt I could take on the quick task of respraying the engine bay in bright white to fix the overspray error from last year. Through January over a few weeks I filled some minor holes and gaps in the engine bay area and prepped in readiness for painting.
Set back number 1: I damaged, beyond repair, the new spray gun bought last year by over tightening a BCP coupling.
Set back number 2: In my haste to make do with the other spray gun, I didn’t get my mixing ratios right (hindsight) by misreading the ratios on the measuring cup.
Set back number 3: Because of the messed up ratios the paint was too thin and the spray gun pattern was all over the place. Paint coverage was poor with runs and pooling of the paint, it was time to stop and clean up the mess. Subsequently, the area was later re-rubbed down in readiness for another attempt when I felt confident and ready to tackle it again.
