
November 2022 and with the earlier jobs done I could take a closer look at the bodywork in some more detail. It had been on my mind for some time but I was keen to try out the Cobra Bedliner I had bought back in March 2022. It all looked simple on the video I watched a few times and in reality the process of mixing and application was not difficult, though a bit messy.
I approached the task in two stages, the rear end was to be first as it was more accessible with less prep work required and the front was to be the second stage, requiring more preparation and other minor jobs.




For the second stage on the front end, I needed to clean up the excess welds, unwanted previous black undercoat, weld up some minor holes and fit a brake pipe bracket on the front right inner wheel arch. I hadn’t attempted welding on bodywork since those disastrous days way back in 1996. It took a few attempts to securely weld the bracket and plug the holes in the wing arch mounting areas but in the end all turned out OK.







The overall experience of applying the Bedliner was OK and not as difficult as I first thought it was going to be. I tried my best to take my time and not rush things. Measuring the 2K bright white paint from the tin into the measuring pot (roughly) was probably the most messy part of the process. I seemed to hurry myself spraying, thinking the Bedliner would start to dry in the Shultz gun before I could finish, and if I had been slower I probably would have made a better job of coverage on the underside areas. I used two bottles of the Cobra Bedliner, one for each end of the car and I have a third that I intend to use on the floor pan, underside and touch up on the body where needed.
December 2022 – The weather took a turn for sub-zero temperatures and work stopped for a short period.