

By the end of May I had plopped on some more filler to smooth out a few bumps and high spots, mainly on the rear valence and engine bay aperture. I also added some filler to sort out the minor corrosion on the rain gutter on the right side (UK drivers side) above the door. I spent a few on/off days of May into June, rubbing back the filler on the rain gutter repair, rear valence and other small areas on rear portions of the body. I was beginning to think the body was now in the final stages of near completion, but I still have plenty of filler if needed. Around this time I visited Paul at South Coast Customs and he had a 1966 Beetle that he was restoring but was taking it back to bare metal first. The filler on that car was 5-10mm thick on the lower rear quarter panels and hid a multitude of poorly executed repairs, something I wanted to avoid this car in having too much filler.






At the end of this stage I was considering the options of installing a third brake eye, behind the cooling grills above the engine compartment. There was a mixture views on the Volkszone forum, especially cutting into the metal work beneath the rear window to insert a removable plate with an after market LED brake light fitted. With the 1302S being a relatively scarce Beetle these days, I had begun second thoughts on making a cut out under the rear window to insert the 3rd brake eye and started to consider a self adhesive LED light strip instead.
My other question to the forum was whether I should grind off or keep the tar board hooks on the engine bay firewall – I didn’t need much convincing… I decided to grind off the tabs which in doing so was sending an unmanageable shower of sparks that were getting everywhere all over me. I resorted to knocking them off with my spot weld chisel and then grind back with a flap disc, far less sparks flying all over the place. The only problem with knocking off the spot welds was that it created two more holes in the fire wall that I will have to fill or cover up.





I laid a (fourth) coat of primer on the rubbed down areas and the engine firewall looked a lot neater with the tar board tags having been removed. The rear valence was repainted and other smaller parts like the fuel filler flap and engine lid hinge mounts were painted in primer as well.