Categories
bodywork paint

1st Coat of Primer

Easter Sunday (April 2023) and I took the plunge for my first attempt to apply a coat of primer with the spray gun. The work space around the Beetle was tidied, cleared of obstructions and covered up and I had set up the compressor with the new air hose line for better air delivery to the spray gun. The next step was to mix up the primer paint, I had tried out on the Corsair last year, with questionable results. The measuring cup made things quite easy with appropriate markings for the proportional amounts I needed for the primer, hardener of 4 to 1 with 15% thinners. I used a tip, from the internet, of covering the edge of the tin with foil to make pouring of the primer a bit more controlled and a cleaner experience, and it worked fairly well.

With the mixture ready and added to my used spray gun which came with the compressor, obtained last year, I started to spray. Well, more like it spat the paint out as if it were silly string. Luckily I had a clean unused spare from the same source as the compressor and I transferred the paint to the new gun. The paint came out as it should and I set to painting the interior first. All was going well and I mixed up a second batch to continue with the exterior, spare wheel well and engine bay.

On the whole I was pleased with my efforts with the primer giving a good smooth and even finish masking the different layers of filler and flattened original paint. I could now see where more filler would be required to even out the low/high spots and touch up the rough or uneven areas.

Categories
bodywork paint

Schultz Gun Painting (Cobra Bedliner)

November 2022 and with the earlier jobs done I could take a closer look at the bodywork in some more detail. It had been on my mind for some time but I was keen to try out the Cobra Bedliner I had bought back in March 2022. It all looked simple on the video I watched a few times and in reality the process of mixing and application was not difficult, though a bit messy.

I approached the task in two stages, the rear end was to be first as it was more accessible with less prep work required and the front was to be the second stage, requiring more preparation and other minor jobs.

For the second stage on the front end, I needed to clean up the excess welds, unwanted previous black undercoat, weld up some minor holes and fit a brake pipe bracket on the front right inner wheel arch. I hadn’t attempted welding on bodywork since those disastrous days way back in 1996. It took a few attempts to securely weld the bracket and plug the holes in the wing arch mounting areas but in the end all turned out OK.

The overall experience of applying the Bedliner was OK and not as difficult as I first thought it was going to be. I tried my best to take my time and not rush things. Measuring the 2K bright white paint from the tin into the measuring pot (roughly) was probably the most messy part of the process. I seemed to hurry myself spraying, thinking the Bedliner would start to dry in the Shultz gun before I could finish, and if I had been slower I probably would have made a better job of coverage on the underside areas. I used two bottles of the Cobra Bedliner, one for each end of the car and I have a third that I intend to use on the floor pan, underside and touch up on the body where needed.

December 2022 – The weather took a turn for sub-zero temperatures and work stopped for a short period.

Categories
paint

Back from the Powder Coaters

By the end of the month (July 2021) the floor pan and various other parts came back to Paul’s yard, from Blandford Industrial Spraying, looking fantastic in their bright white paint (RAL 9010).

1302S floor pan powder coated new frame head and floor pan
1302S floor pan powder coated new frame head and floor pan
1302S floor pan powder coated floor pan and parts
1302S floor pan powder coated floor pan and parts