Back in August 1995, at our rented garage (lock up), the wife and I had stripped the car down so we could assess the way forward. It had become apparent that a few more welding jobs would be needed. By the summer of 1996 I had been preparing to work on the Beetle so had purchased a SIP350 Turbo welder, associated accessories and sheet metal to tackle the body work that required repair. Some new panels comprising of a semi-W engine lid, matching rear valance and a pre ’67 front valance had been purchased to fire the imagination from URO in Bournemouth. We had also purchased a small car trailer to move the Beetle about.
newspaper stuffed in the ‘A’ posts
We took the beetle around to my ‘in-laws’ home to work on in their garden as they had a fair amount of space and it was easier to get electric to as well. A closer inspection was revealing a myriad of issues of old repairs over old repairs and in dire need of repair. It’s true, I found newspaper stuffed in the ‘A’ posts from an Essex publication after I had chipped away a bodge of filler around the lower door hinges, on both sides. A DVLA vehicle history search, that I later obtained, revealed it had spent some time in Billericay, Essex in the mid 1970s.






It didn’t occur to me to seek repair panels for these sections, being the complete novice at this body work business I was trying to make my own patches out of sheet metal. I took instruction from various members of the family trying out my new MIG welder but I was mainly blowing holes in the bodywork and new steel creating a fair amount of spatter welding. The advice being dished out wasn’t really helping me make a decent job of this and my patch work of repairs were bloody awful. I was too afraid of cutting too much out and ruining the structural strength of the vehicle.
The end of that week in August 1996, I became very aware I had bitten off more than I could chew on this project and the car was wheeled away and put back into it’s garage for another long stint of storage.













