Normal Corsair business resumed

Early March and I put the Corsair through another ordeal of the MOT Test. It failed again, but this time only on the main beam lights. That I could cope with as I am unlikely to drive the car in the dark and at least now the Corsair didn’t have the structural fails against it.

I had this main beam headlight issue before and it was fixed by John Midwood’s friend, Peter, but I didn’t know what he did. I knew the main beam headlights worked, as I could ‘flash’ the lights but as soon as I switched from dip beam to main, the lights would go out. So the problem had to be a contact or connection in the column stalk. The images below show that to remove the indicator stalk, the steering wheel was taken off to make access easier.

With hindsight after the test I was considering changing the whole column stalk with one from a Series 3 Land Rover – swapping a like for like modification I had seen on the Ford Corsair Owners Facebook page. Where I work there are many Land Rovers and I thought about seeing if they had any spares, but I had the foresight to ask if the workshop staff could take a look at and test my indicator, main beam switch. After about 30 minutes left with the workshop people they called me to say it was fixed – dirty contacts. So in the end it only cost me a box of mini muffins for the workshop staff.

With good weather during March and into April, the Corsair got a fair amount of use with a couple of trips to my place of work and running local errands to the shops and recycling centre..

Ford Corsair on a roadside delivery errand
Ford Corsair on a roadside delivery errand

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.