Steering Box

Mid March and I had time to tackle the steering box removal. I decided to keep the Corsair in it’s garage rather than move it to the other garage/work shop to work on. All I had to do was turn it around facing outwards and then use the passenger door to get in and out of the car.

I took my time starting inside the car, first by removing the parcel shelf before taking off the steering wheel, steering column shroud and indicator stalk, column bolts to the dashboard and a bolt to the pedal assembly. With the car on axle stands, I then worked under the front to separate the steering arm from the drag link and then I progressed to removing the 3 main bolts holding the box to the inner wing. It was all going well and took me about an hour to get as far as the steering box being disconnected and ready to come out.

But it didn’t come out as easily as the Haynes manual suggested because I couldn’t get it past the exhaust manifold down pipe. After another hour of tussling with the manifold, which wouldn’t come off either, I stopped to think some more. During the following few days it dawned on me I only removed the parcel shelf inside the car and not the support brace added by Crayford to add rigidity to the convertible conversion. When I removed the support brace it gave me much more wiggle room, though I had to separate the offside track rod end from the drag link to allow the steering box to drop down. Apart from the brackets on the column catching on wires under the dash and other surfaces and edges the whole assembly came out fairly easily from under the car.

The next phase was to take it to Holman Engineering in Addlestone, Surrey for inspection, refurbish and rebuild.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.