Blue Dots

blue dot light effect on Corsair

I first came upon these back in 1990s as a custom tail light effect mainly seen on hotrods or pre 1970 custom cars. By the mid nineties, I was spurred on by a friend in the Capri Club who had them on his Mk1 Capri and subsequently I fitted them on a couple of my Capris. I remember the packaging stating ‘off road’ use only and only got picked up by the police once for the ‘non factory’ lens alteration, so from there on I carried spare unaltered lenses in the car.

Fitting was quite straight forward and now armed with better tools than 25+ years ago, it was an easier job. I ensured the hole in the lens I was to cut was directly aligned over the bulb holder to maximise the final effect. I used a 19mm (wood) drill bit with a variable speed drill, though a 24mm bit would have been ideal. Using a small curved file I enlarged the hole to 24mm so it could house the chrome ring which would hold the blue dot lens. There are four tabs on the chrome bezel ring, two to grip to the light lens and the other two to grip the blue dot. For greater security I used a universal clear glue to hold the blue dots in place.

With the simple modification done, fitting the lenses was all that was required and some low light to get the full effect of the lights with the brake lights on (see video, above).

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.