I had the front wheels laser aligned by 5 Square Motors as it is where I have taken the Corsair for the MOTs, so I was seeking continuity. Unfortunately I couldn’t have the chap who did the MOTs as another mechanic was lined up for the job. On the day the wheels were aligned OK, I presume, but when I asked for a check of the bolts on the TCAs and other suspension parts the mechanic tasked with the job claimed he found a couple of loose bolts and decided he didn’t want to sign off the job as safe, as it was work he hadn’t done. It kind of defeated the object of asking the garage to check as I couldn’t do the final tightening of bolts with the wheels on the ground. I’ll now have to do it with the car up on ramps, just hoping the angle of the car on the ramps won’t interfere with a proper tightening of the bolts.
Late one Friday afternoon and I got the Corsair up on the car ramps. I rechecked all the bolts to the TCAs, steering ball joints and top mounts, none were loose. I did add washers to the ball joint ends just for peace of mind after ‘being advised’ by the mechanic that didn’t want to check my work. I later took the Corsair for a decent drive around the locale and the improved feel of the steering was evident as was the general ride. No longer did the car rattle and shake over bumps and ruts in the road. The new dampers had improved the ride massively, so I would call that a result.
