The other weekend I got around to fitting the new brake discs I bought from Burton. They were discs for Mk1 Cortina/Mk1 Escort/Mk1 Capri but assured they would fit. I took it steady removing the hubs without rushing to ensure I didn’t miss anything along the way.

Near side front Corsair caliper 
Off side front Corsair caliper 
New disc fitted to Corsair hub 
New disc fitted to Corsair near side hub 
New disc fitted to Corsair off side hub
Fitting the new pads revealed that the near side caliper may be the cause of the brakes locking on. As I prised the pistons back to fit the new pads I noticed they stayed back and didn’t creep back out to take up pressure on the discs. On a test drive after sorting out the points and poor running issues, the brake pedal started to get firm again so I put the Corsair away. I then thought about and dug out the old calipers I replaced on the Corsair some 18 years ago and never sent back on exchange for the then new ones.
The next day I made enquiries with automotive brake refurbishment companies, and the only one to get back was BCS Automotive in Nottingham. After a few email exchanges to clarify on details I sent them my very crusty calipers but somehow doubt their estimate will remain the same.

