{"id":472,"date":"2016-02-21T21:03:24","date_gmt":"2016-02-21T21:03:24","guid":{"rendered":"http:\/\/domcoleman.co.uk\/Blog\/?p=472"},"modified":"2016-03-06T21:49:15","modified_gmt":"2016-03-06T21:49:15","slug":"fuel-tank-fuel-line-refit","status":"publish","type":"post","link":"https:\/\/domcoleman.co.uk\/Blog\/fuel-tank-fuel-line-refit\/","title":{"rendered":"Fuel Tank &#038; Fuel Line Refit"},"content":{"rendered":"<p>I had a successful day refitting the fuel tank and putting in the new copper fuel line. Removing the old fuel line (steel) and fuel return pipe was awkward as it necessitated taking out the prop shaft and uncoupling the hand brake cable. It meant the tricky process of putting the new 4 metres of copper fuel line in was made a bit easier. I tried to copy the pattern of bends on the &#8216;bench&#8217; in the garage but it was proving difficult with almost disastrous consequences of kinking and flattening the pipe with my pipe bender. So, the alternative approach of one long length of pipe was positioned up under the car and bent up in situ.<\/p>\n<p><!--more--><\/p>\n<p>While this was happening my son was cleaning up the loose paint and rust around the fuel tank opening in readiness for some Waxoyl treatment prior to refitting the fuel tank. The fuel sender was tapped back into place on the tank and then it was all put back into the car and bolted in. With the tank in place I had an excess of about 10cm (4&#8243;) of fuel pipe to cut off and then connected to the sender unit with some new steel braided hose (that was not easy either, very tight).<\/p>\n<figure id=\"attachment_479\" aria-describedby=\"caption-attachment-479\" style=\"width: 300px\" class=\"wp-caption alignleft\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-479 size-medium\" src=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2016\/02\/20160219_145854-300x169.jpg\" alt=\"Fuel filter and pump\" width=\"300\" height=\"169\" srcset=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2016\/02\/20160219_145854-300x169.jpg 300w, https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2016\/02\/20160219_145854-768x432.jpg 768w, https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2016\/02\/20160219_145854.jpg 1024w, https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2016\/02\/20160219_145854-624x351.jpg 624w\" sizes=\"auto, (max-width: 300px) 100vw, 300px\" \/><figcaption id=\"caption-attachment-479\" class=\"wp-caption-text\">Fuel line &#8211; pump end and yes, the fuel filter looks a little strained on its lower fitments.<\/figcaption><\/figure>\n<figure id=\"attachment_478\" aria-describedby=\"caption-attachment-478\" style=\"width: 300px\" class=\"wp-caption alignleft\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-478 size-medium\" src=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2016\/02\/20160219_125027-300x169.jpg\" alt=\"Corsair fuel tank fitted\" width=\"300\" height=\"169\" srcset=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2016\/02\/20160219_125027-300x169.jpg 300w, https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2016\/02\/20160219_125027-768x432.jpg 768w, https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2016\/02\/20160219_125027.jpg 1024w, https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2016\/02\/20160219_125027-624x351.jpg 624w\" sizes=\"auto, (max-width: 300px) 100vw, 300px\" \/><figcaption id=\"caption-attachment-478\" class=\"wp-caption-text\">Corsair fuel tank fitted with return inlet yet to be blanked\/sealed off<\/figcaption><\/figure>\n<p>At the other end much careful bending around the gearbox, ensuring good exhaust clearance and keeping the pipe snug against the chassis and body work was preferred. I had bought a few stainless steel clips but only required 3 to hold the pipe in place as the existing clips were fine for now. I decided against using the braided fuel line as I wasn&#8217;t cutting it very cleanly and didn&#8217;t want to spoil the rest of it so I\u00a0used some existing pipe for the short joins to the filter and fuel pump.<\/p>\n<p>So, did it work? Oh yes. I put in the remainder of about 3 litres of fuel from\u00a0my mower fuel can, reconnected the battery, turned the ignition and primed the pump. It took an extra turn over or two than\u00a0previous occasions but the Corsair fired in to life drawing fuel from its own tank. Tickover\u00a0was lumpy and irregular\u00a0with varying amounts of choke and is in desperate need of a proper tune up. I then drove the car off the ramps, job done with no leaks (yet). Hand brake worked too much to my relief and helped slow the descent from the car ramps.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>I had a successful day refitting the fuel tank and putting in the new copper fuel line. Removing the old fuel line (steel) and fuel return pipe was awkward as it necessitated taking out the prop shaft and uncoupling the hand brake cable. It meant the tricky process of putting the new 4 metres of &hellip; <\/p>\n<p class=\"link-more\"><a href=\"https:\/\/domcoleman.co.uk\/Blog\/fuel-tank-fuel-line-refit\/\" class=\"more-link\">Continue reading<span class=\"screen-reader-text\"> &#8220;Fuel Tank &#038; Fuel Line Refit&#8221;<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[15],"tags":[],"class_list":["post-472","post","type-post","status-publish","format-standard","hentry","category-fuel"],"_links":{"self":[{"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/posts\/472","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/comments?post=472"}],"version-history":[{"count":7,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/posts\/472\/revisions"}],"predecessor-version":[{"id":493,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/posts\/472\/revisions\/493"}],"wp:attachment":[{"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/media?parent=472"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/categories?post=472"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/tags?post=472"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}