{"id":2050,"date":"2023-06-01T21:10:53","date_gmt":"2023-06-01T21:10:53","guid":{"rendered":"http:\/\/domcoleman.co.uk\/Blog\/?p=2050"},"modified":"2023-06-01T21:10:53","modified_gmt":"2023-06-01T21:10:53","slug":"mid-year-review-june-2023","status":"publish","type":"post","link":"https:\/\/domcoleman.co.uk\/Blog\/mid-year-review-june-2023\/","title":{"rendered":"Mid Year Review &#8211; June 2023"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">Due to a wet and miserable March through to April I didn&#8217;t really get much chance to use the Corsair. The last decent outing was to the Sturminster Newton meet up in February and that was with the roof up due to being a bit chilly. It was on the return trip that the speedometer stopped working and I assumed it had slipped out from the gearbox as it had done before. It had been problematic in the latter part of last year by showing the speed but randomly not operating the odometer. For as long as I can remember with the car (as I fitted the speedo cable in the early years) it never had the official bracket to hold the end point into the gearbox. For years I relied on a crude clamp screwed into the floor to keep the cable located which in turn held the end point in the gearbox well enough to get a reading.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A few weeks later (on a dry March day) I fabricated, from a rear brake cylinder &#8216;U&#8217; clamp, a small bracket to keep the speedo cable from falling out of the gearbox housing. I sourced a bolt (possibly metric) that with some effort I made it fit the thread in the gearbox to hold the speedo cable in place. It was in the most awkward place to reach as the gearbox cross member and transmission tunnel both hindered the ease of access but I tightened up the bolt and it kept the speedo drive in place. Upon the checking the other end of the speedo cable behind the speedometer I found the cable had completely come adrift &#8211; problem solved, so I thought. A test drive later showed it hadn&#8217;t resolved the issue.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">During May, I had used the Corsair for a couple of local joy rides, the recycling run, two fifty mile round trips to work and on none of the occasions did the speedo spring into life. With another long bank holiday I had the time to get the Corsair up on the ramps and have another look at the speedo. This time (with the ramps) it was easier to get to on the nut holding the clamp on the gearbox and lift away the speedo cable. With the &#8216;other half&#8217; watching the speedometer gauge I vigorously turned the cable in the sleeve and got the all good response that the speedo needle moved on each occasion. However, this time refitting the cable end point, &#8216;U&#8217; shaped clamp and my dodgy bolt I made sure it wasn&#8217;t tightened up to much allowing for a bit of lateral movement. This looser configuration worked and the speedo was now operational and clocking the miles. I decided not to extract the clutch slave cylinder on this occasion.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large is-resized\"><a href=\"https:\/\/uk1302s.wordpress.com\/2023\/05\/11\/floor-pan-bedliner-applied\/\" target=\"_blank\" rel=\"noreferrer noopener\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/uk1302s.files.wordpress.com\/2023\/05\/20230507_151359-resize.jpg?w=580\" alt=\"\" width=\"676\" height=\"380\"\/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Another reason for not using the Corsair so much was that I had been working on the Beetle project car. You can read the latest blog <a href=\"https:\/\/uk1302s.wordpress.com\">at this link<\/a> or click the picture above. <\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Thanks for reading.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Due to a wet and miserable March through to April I didn&#8217;t really get much chance to use the Corsair. The last decent outing was to the Sturminster Newton meet up in February and that was with the roof up due to being a bit chilly. It was on the return trip that the speedometer &hellip; <\/p>\n<p class=\"link-more\"><a href=\"https:\/\/domcoleman.co.uk\/Blog\/mid-year-review-june-2023\/\" class=\"more-link\">Continue reading<span class=\"screen-reader-text\"> &#8220;Mid Year Review &#8211; June 2023&#8221;<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[19,12],"tags":[],"class_list":["post-2050","post","type-post","status-publish","format-standard","hentry","category-driving","category-gearbox"],"_links":{"self":[{"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/posts\/2050","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/comments?post=2050"}],"version-history":[{"count":7,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/posts\/2050\/revisions"}],"predecessor-version":[{"id":2057,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/posts\/2050\/revisions\/2057"}],"wp:attachment":[{"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/media?parent=2050"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/categories?post=2050"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/tags?post=2050"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}