{"id":1634,"date":"2020-04-08T20:37:19","date_gmt":"2020-04-08T20:37:19","guid":{"rendered":"http:\/\/domcoleman.co.uk\/Blog\/?p=1634"},"modified":"2020-04-08T20:42:26","modified_gmt":"2020-04-08T20:42:26","slug":"waxoyling-again","status":"publish","type":"post","link":"https:\/\/domcoleman.co.uk\/Blog\/waxoyling-again\/","title":{"rendered":"Waxoyling Again"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">I Waxoyled the Corsair 3 years ago (<a href=\"https:\/\/domcoleman.co.uk\/Blog\/waxoyl_the_amateur_way\/\">March 2017<\/a>) and upon seeing the underside earlier this year during the MOT inspection it was clear it needed doing from the rear axle chassis to the front as far as the front footwell sections. The old under seal was flaking off in large chunks and in some places exposing fresh metal.  A messy business prepping for the Waxoyl, but equipped with safety specs, some decorators scrapers, wire brushes and a rubber dusting brush I was good to go. The most awkward part was the manoeuvring around on my back and keeping my arms up while trying to apply pressure and elbow grease.<\/p>\n\n\n\n<figure class=\"wp-block-gallery columns-3 is-cropped wp-block-gallery-1 is-layout-flex wp-block-gallery-is-layout-flex\"><ul class=\"blocks-gallery-grid\"><li class=\"blocks-gallery-item\"><figure><a href=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214530.jpg\"><img loading=\"lazy\" decoding=\"async\" width=\"797\" height=\"1024\" src=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214530.jpg\" alt=\"Waxoyl equipment\" data-id=\"1643\" data-full-url=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214530.jpg\" data-link=\"https:\/\/domcoleman.co.uk\/Blog\/psx_20200405_214530\/\" class=\"wp-image-1643\" srcset=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214530.jpg 797w, https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214530-233x300.jpg 233w, https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214530-768x987.jpg 768w\" sizes=\"auto, (max-width: 767px) 89vw, (max-width: 1000px) 54vw, (max-width: 1071px) 543px, 580px\" \/><\/a><figcaption class=\"blocks-gallery-item__caption\">Waxoyling equipment<\/figcaption><\/figure><\/li><li class=\"blocks-gallery-item\"><figure><a href=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214359.jpg\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214359.jpg\" alt=\"\" data-id=\"1641\" data-full-url=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214359.jpg\" data-link=\"https:\/\/domcoleman.co.uk\/Blog\/psx_20200405_214359\/\" class=\"wp-image-1641\" srcset=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214359.jpg 1024w, https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214359-300x169.jpg 300w, https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214359-768x432.jpg 768w\" sizes=\"auto, (max-width: 767px) 89vw, (max-width: 1000px) 54vw, (max-width: 1071px) 543px, 580px\" \/><\/a><figcaption class=\"blocks-gallery-item__caption\">Ford Corsair underside with most of its underseal scraped off <\/figcaption><\/figure><\/li><li class=\"blocks-gallery-item\"><figure><a href=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214427.jpg\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214427.jpg\" alt=\"Ford Corsair underside waxoyled, 2020\" data-id=\"1642\" data-full-url=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214427.jpg\" data-link=\"https:\/\/domcoleman.co.uk\/Blog\/psx_20200405_214427\/\" class=\"wp-image-1642\" srcset=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214427.jpg 1024w, https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214427-300x169.jpg 300w, https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214427-768x432.jpg 768w\" sizes=\"auto, (max-width: 767px) 89vw, (max-width: 1000px) 54vw, (max-width: 1071px) 543px, 580px\" \/><\/a><figcaption class=\"blocks-gallery-item__caption\">Ford Corsair underside now Waxoyled, March 2020<\/figcaption><\/figure><\/li><\/ul><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">A good 2 hours of this saw the worst of the flaking  under-seal removed and then the frustrating business of applying the wax began. Firstly I warmed the Waxoyl in  a bucket of hot water for about 20 minutes &#8211; not that I noticed much in the change of the viscosity. Aftet transferring some waxoyl the special Waxoyl pump system and hand pumping pressurising it, the steady even spray of wax I was expecting sputtered out and squirted in directions I didn&#8217;t want before clogging. Washing the nozzle took several attempts in white spirit to get the spray effect I desired and then had to repeat the process countless times through out the process. I eventually covered all the areas I needed and not all over myself.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"974\" height=\"1024\" src=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214811.jpg\" alt=\"\" class=\"wp-image-1644\" srcset=\"https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214811.jpg 974w, https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214811-285x300.jpg 285w, https:\/\/domcoleman.co.uk\/Blog\/wp-content\/uploads\/2020\/04\/PSX_20200405_214811-768x807.jpg 768w\" sizes=\"auto, (max-width: 767px) 89vw, (max-width: 1000px) 54vw, (max-width: 1071px) 543px, 580px\" \/><figcaption>Dog coming to check on progress<\/figcaption><\/figure>\n","protected":false},"excerpt":{"rendered":"<p>I Waxoyled the Corsair 3 years ago (March 2017) and upon seeing the underside earlier this year during the MOT inspection it was clear it needed doing from the rear axle chassis to the front as far as the front footwell sections. The old under seal was flaking off in large chunks and in some &hellip; <\/p>\n<p class=\"link-more\"><a href=\"https:\/\/domcoleman.co.uk\/Blog\/waxoyling-again\/\" class=\"more-link\">Continue reading<span class=\"screen-reader-text\"> &#8220;Waxoyling Again&#8221;<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[21,3],"tags":[],"class_list":["post-1634","post","type-post","status-publish","format-standard","hentry","category-body-chassis","category-tinkering"],"_links":{"self":[{"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/posts\/1634","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/comments?post=1634"}],"version-history":[{"count":12,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/posts\/1634\/revisions"}],"predecessor-version":[{"id":1651,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/posts\/1634\/revisions\/1651"}],"wp:attachment":[{"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/media?parent=1634"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/categories?post=1634"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/domcoleman.co.uk\/Blog\/wp-json\/wp\/v2\/tags?post=1634"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}